PDA

View Full Version : Volvo Specialist Northern Ireland Belfast


MOLLYPOPPY
Mar 17th, 2012, 20:25
hi anyone know as any specilists in the northern ireland belfast/co down area would be ideal thanks in advance

DCN85
Mar 17th, 2012, 20:28
http://www.beechillgarage.co.uk/

I've had good experience with these guys. Small outfit but know what they're at. Volvo, Bentley, Ferrari, Maserati, Lotus specialists I believe.

NI_Volvo_Nut
Mar 18th, 2012, 07:20
I'm in Bangor mate, what are you needing done?

Marlborogold
Mar 3rd, 2013, 22:14
Hi
While checking level of additive tank i got Engine System service Required.
Checked and following codes came up
ADM-0003 additive level sensor faulty signal
ECM-A610 additive dosing module-qualifier unknown.
Was wondering if I replaced the dosing tank would this cure the problem?Would appreciate any thoughs you may have .
Ps I live in Monaghan and travel all aroung the

NI_Volvo_Nut
Mar 5th, 2013, 20:31
Hi
While checking level of additive tank i got Engine System service Required.
Checked and following codes came up
ADM-0003 additive level sensor faulty signal
ECM-A610 additive dosing module-qualifier unknown.
Was wondering if I replaced the dosing tank would this cure the problem?Would appreciate any thoughs you may have .
Ps I live in Monaghan and travel all aroung the
What sort of car?

Bryan271
Mar 10th, 2013, 19:04
I have a 05 v2.0 d with same message on it. Comes on about 5 seconds after I start the car.Got the DPF removed a month or so ago and Brain reprogrammed but guy that done it could not get message off dash. Was wondering can you remove the message and will message mean it will fail mot...thanks Bryan Enniskillen.....

Marlborogold
Mar 11th, 2013, 09:30
Its a c30 1.6d.
After a few days the msg no longer appeared, it may be that after a number of cycles it was no longer throwing up fault.
Have done a bit of of digging and come up with the following:
1. Reset the level in the additive tank
Or
2. Replace the additive tank with one out of a brakers yard. The level indicator is mearly a strip inside the tank . You may have to reset the level when you replace the tank.
3. If you put the correct resistor across the plug that goes in to the level indicator,it should read say half full all the time and get rid of msg. This should make no difference as you no longer have a dpf.

These are just my thoughts and I could be very wrong

simon21
Mar 18th, 2013, 14:38
Do you services on Volvo's and what would your price be for the major service on a 2008 V50?

NI_Volvo_Nut
Mar 18th, 2013, 21:08
Do you services on Volvo's and what would your price be for the major service on a 2008 V50?
Drop me an email buddy

AndyD345@btinternet.com