PDA

View Full Version : 340 propshaft needed

GLENW
May 12th, 2009, 14:17
i am in need of a propshaft for a 86 340 1.4 engine,if you can help please get in touch,,,,,,,cheers glen
j340glt
May 18th, 2009, 20:36
do you still need this mate??
GLENW
May 20th, 2009, 15:42
YES,sorry just realised you had left a message thought i had no mail,pretty new to this,do you have one you can call or text me on07762017198 cheers glen
Clan
May 20th, 2009, 18:07
If your rubber joint has broken the cause is rear engine mounts sagging , best change those too .
GLENW
May 21st, 2009, 18:52
sorry its worse than that,durin clutch change i ended up having to drill out the allan key pinch bolt and replaced it with a nut and bolt,it lasted 6 months before the obvious happened and it slipped on the gear box shaft,,,,a poor bodge even for me,,, thanks again
Clan
May 21st, 2009, 19:47
If you need one or two decent clamps let me know
migrator
May 22nd, 2009, 00:03
sorry its worse than that,durin clutch change i ended up having to drill out the allan key pinch bolt and replaced it with a nut and bolt,it lasted 6 months before the obvious happened and it slipped on the gear box shaft,,,,a poor bodge even for me,,, thanks again

Glen,

Propshaft and gearbox are available here at Heriot. You will need to come and get them off the car (with local assistance). Gearbox £50; propshaft £20.

Car is 120000 miler (and the engine is also available less the carb).

Let me know if you still need these and want what I have. Thanks.
GLENW
May 22nd, 2009, 18:23
your on,when is a good time for you
migrator
May 22nd, 2009, 20:14
your on,when is a good time for you

Glen,

PM sent with details.
migrator
May 25th, 2009, 19:51
Glen,

What is left of this 340 will be going to the crusher on Monday next (01-06-09) along with an old 960 estate. I need the space in the garden for the latest arrivals. If you want these parts do let me know when you are coming.