Volvo Owners Club Forum

Volvo Owners Club Forum (https://www.volvoforums.org.uk/index.php)
-   General Volvo and Motoring Discussions (https://www.volvoforums.org.uk/forumdisplay.php?f=21)
-   -   s80 d5 auto gearbox problem. (https://www.volvoforums.org.uk/showthread.php?t=41403)

hoppyS80 Jul 29th, 2007 13:21

s80 d5 auto gearbox problem.
 
hi all,
The auto box is playing up.its ok or short local journeys.no problem,but on longer trips 30 miles or so the auto box stops changing gears properly.it seems to stick in 3rd or fourth & wont change up or down ,unless selected manually.
any ideas?

CTCNetwork Jul 29th, 2007 15:17

Hi,

Any fault codes? Get them read JIC

What does the gearbox oil/fluid look like? Clean/pinkish or dirty/burnt?
Is the level Ok?
Depending on the above a change/flush of the gearbox may be appropriate...

Des. . . ;)

hoppyS80 Jul 30th, 2007 23:45

s80 gear box problem
 
hi,

thanks for the response.there is a message stating transmission service required but i have had the atf changed when i had it serviced at 100,000.levels ok.timing belt changed etc...
i'm not sure whar you mean when you say have the error codes read jic,can you explain.

cheers

111 Jul 31st, 2007 14:56

I think jic means just incase. But I may be wrong.

DSK Jul 31st, 2007 16:38

Error codes can be read by plugging a diagnostic error code reader into your car. Volvo can do this for you or most decent independant garages that have code readers.

PAZ3154 Aug 1st, 2007 13:14

as Des said get the codes read asap. 'Tranmission service required' message means a fault logged in the gearbox ecu. until that message is erased/checked the gearbox will be in 'limp home' mode. Gear changes will be all over the place

CTCNetwork Aug 1st, 2007 16:16

Hi,
Quote:

Originally Posted by 111 (Post 270167)
I think jic means just incase. But I may be wrong.

Yes:
Just
In
Case

Des. . . ;)

hoppyS80 Aug 3rd, 2007 19:28

s8o auto gearox problem
 
thanks everyone for the advice.
i have rang the local volvo dealer ,its booked in for monday.
the guy just said wat you guys have said error codes limp mode etc...
they have quoted me 94 pounds for 1hours labour.
the guy whoseemed very helpful thought they should be able to diagnose the problem within the hour.

will update you all on the progress


All times are GMT +1. The time now is 22:56.

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.