View Single Post
Old Aug 19th, 2010, 16:31   #17
BestGear
Master Member
 
BestGear's Avatar
 

Last Online: Feb 3rd, 2024 19:39
Join Date: Sep 2009
Location: Sunny Scotland
Default

Guys

I removed a headrest for an exploratory look.... and a measure.

For the record, the headrest poles are 12mm diameter, and the headrest is 265mm tall, 260mm wide at base and 160mm wide at the top. The poles are 150mm between centres (wide).

The headrest can be removed as said by Roy (thanks) - just press where my thumb is and you will feel the button - same under the other pole too.



Once off, you can see there is a nice zip running along the bottom of the headrest to remove the cover! Result! The ends of the zip are neatly tucked away so dig in to find them.






Once undone, you can see the headrest is composed of dense black polystyrene.




So - all I need to do now is find out where the metal "bars" go inside the polystyrene to understand where and how deep the monitors can be cut into. I have heard its not "too deep" - not sure what that means... sure will find out!

David
BestGear is offline   Reply With Quote