Volvo Owners Club Forum - View Single Post - S40: - DESPERATE HERE - P0335 Crankshaft sensor

KGrahamR · Jan 13th, 2009, 21:09

Desperationly need help here. We have a 2001 S40 that we had the head off.

Put everything back together, timed by all accounts perfectly..all marks align, slack out of the belt etc.

The car ran fairly well (had a turbo problem too) then we started getting cam/crank sensor DTC errors. The car would intermittently start/run excellent then not...we would some times disconnect the crank sensor and the car would start/then not??

We did replace both cam and crank sensors several times each.

Currently the car WILL start on its own without pedel but WILL NOT accelerate/rev up even at idle...both with and without the turbo pressure tube connected to the throttle body.

BTW the cylinder pressures are good and we have put on several crank sensors ALL of which tested good??

Please, we need to get this car fixed; we need to sell it for living expenses

Jan 13th, 2009, 21:09	#1
KGrahamR New Member Last Online: Jan 17th, 2009 15:02 Join Date: Jan 2009 Location: Atlanta, GA	DESPERATE HERE - P0335 Crankshaft sensor - no acceleration Desperationly need help here. We have a 2001 S40 that we had the head off. Put everything back together, timed by all accounts perfectly..all marks align, slack out of the belt etc. The car ran fairly well (had a turbo problem too) then we started getting cam/crank sensor DTC errors. The car would intermittently start/run excellent then not...we would some times disconnect the crank sensor and the car would start/then not?? We did replace both cam and crank sensors several times each. Currently the car WILL start on its own without pedel but WILL NOT accelerate/rev up even at idle...both with and without the turbo pressure tube connected to the throttle body. BTW the cylinder pressures are good and we have put on several crank sensors ALL of which tested good?? Please, we need to get this car fixed; we need to sell it for living expenses