Quote:
Originally Posted by GrahamBrown1
You will see some T25 screws at the lower front and rear of the liner. Remove these along with two 10mm plastic nuts either side of the strut. Then the liner just unclips. The alarm siren is bolted to the chassis via a bracket. 2 10mm bolts.
The only rivet you may come across could be for the front mudflap if you have them fitted. There is usually the T25 screws and one rivet which from memory is actually plastic but you might not actually need to remove it, it’s a while since I’ve had one out.
|
Brilliant, thankyou very much Graham