|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
Information |
|
fitting a volvo 6 cd changer to a s70r...........Views : 1281 Replies : 9Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 24th, 2007, 13:06 | #1 |
Guest
Location:
|
fitting a volvo 6 cd changer to a s70r...........
hi there,
i have just got a volvo 6 disc cd changer, i have got the wiring in the boot passenger side boot. but where do i fit the changer ? is it the same as the estate ? i have got the bracket on the changer and it lines up with the bolt holes the same as a estate would have it fitted but i need to fit a cover over the changer but the estate cover wont fit so my volvo s70r the dealer tells me ? has anyone got a s70 with a cd changer fitted in the boot from the factory ??? does it have a cover ??? i could really do with some help so i dont want to make a pigs ear of it and ruin my lovely s70r. any helper ?????????? many thanks kevin |
Mar 29th, 2007, 22:21 | #2 |
Guest
Location:
|
bttt,
come on there must be a helpful s70 owner ?????? thanks kevin |
Mar 29th, 2007, 22:53 | #3 |
Premier Member
|
It does have a cover and does bolt into the boot floor using the volvo bracket. I'll take some pictures tomorrow if you want.
I'll get you a part number too There's a little loom that plugs into the electric arial supply too that should come with the changer.
__________________
HAD; 440 GLT(Loved it), 850 GLT auto(Loved it), S70 2.5T(Nothing but problems!), 850R auto(Loved it!!), S60 D5 SE (Nothing but problems!) GOT; S60 D5 SE Lux Auto RAF Marham Track Day Co-Ord' Last edited by Georgey dee; Mar 29th, 2007 at 22:56. |
Mar 30th, 2007, 15:26 | #4 |
Guest
Location:
|
hi there Georgey dee,
i would be so grateful if you would take some pictures for me and the part numbers would help thanks for your time kevin |
Mar 30th, 2007, 16:41 | #5 |
Premier Member
|
I've ripped my car to bits and taken loads of photos. I'll post them when I get home. Mine is an 850 but they are exactly the same parts as i have owned an S70 in the past.
Post to come soon.
__________________
HAD; 440 GLT(Loved it), 850 GLT auto(Loved it), S70 2.5T(Nothing but problems!), 850R auto(Loved it!!), S60 D5 SE (Nothing but problems!) GOT; S60 D5 SE Lux Auto RAF Marham Track Day Co-Ord' |
Mar 30th, 2007, 17:26 | #6 |
Guest
Location:
|
thanks mate
kevin |
Mar 30th, 2007, 17:41 | #7 |
Premier Member
|
Here are some photos of how to remove/refit the changer. with the part number of the cover.
Open boot, cd changer is on the left<<<< CD Cover.jpg Take cover off by pulling up Cover lying next to changer.jpg Part number of cover if a new one is required. Cover part number.jpg remove boot carpet No cover with carpet.jpg to this Cd changer no carpet.jpg Remove both 10mm bolts and lift Unplug cd changer.jpg Dont pull too far as its still plugged in Close up of plugs.jpg unplug and remove cd changer Hole left after removal.jpg Remove boot trim on the left and pull to centre of boot to gain access to the power aerial Aerial connection.jpg There's some extra wiring for my rear LED strobes for the track safety car role but you get the jist If you dont have the adaptor for the power then an inline splice will do, just check which one you go into (need to be the ignition supply) Refit is reverse of removal HAVE FUN
__________________
HAD; 440 GLT(Loved it), 850 GLT auto(Loved it), S70 2.5T(Nothing but problems!), 850R auto(Loved it!!), S60 D5 SE (Nothing but problems!) GOT; S60 D5 SE Lux Auto RAF Marham Track Day Co-Ord' |
Mar 30th, 2007, 18:09 | #8 |
Guest
Location:
|
many many thanks, and thanks again.
on the cd changer bracket i have got on the left handside looking at it there is another bolt hole has yours got this ? it would be behind your back light on your pictures ? also how does the cover fix in place ? thanks again, now i can get fit the cd kevin |
Mar 30th, 2007, 20:20 | #9 |
Premier Member
|
Sorry mate, dont know what you mean, which back light?
The cover just pushes on and is held in place by the foam on the inside. The bracket is held in place by 2 10mm bolts and the other hole is for the wiring loom to clip into.
__________________
HAD; 440 GLT(Loved it), 850 GLT auto(Loved it), S70 2.5T(Nothing but problems!), 850R auto(Loved it!!), S60 D5 SE (Nothing but problems!) GOT; S60 D5 SE Lux Auto RAF Marham Track Day Co-Ord' Last edited by Georgey dee; Mar 30th, 2007 at 20:45. |
Mar 30th, 2007, 21:22 | #10 |
Guest
Location:
|
hi again, i was wrong about the bolt hole near the rear light, i can now see from the pictures, the cables are cable tied to the bracket.
many thanks kevin |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|