|
S40 / V40 '96-'04 General Forum for the Volvo S40 and V40 (Classic) Series from 1995-2004. |
Information |
|
phase 2 v40 rear shock absorbers which type?Views : 2579 Replies : 6Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 14th, 2009, 20:32 | #1 |
Senior Member
Last Online: Sep 1st, 2017 22:00
Join Date: Nov 2007
Location: liverpool
|
phase 2 v40 rear shock absorbers which type?
hi all thinking of replacing the rear shocks on my 2001 2litre v40 phase 2 the trouble is i phoned around a few places today and was asked are the shocks the comfort ride type im clueless there, anyone got any idea of what shocks and what cost for the rear shocks as mine feels wallowey over the speed bumps on the rear end also are they seperate from the rear coil spring or like the front type mcphearson struts ? your help is much appreciated [/B]
|
Sep 15th, 2009, 11:50 | #2 |
Premier Member
Last Online: Dec 28th, 2022 12:25
Join Date: Jun 2009
Location: Mercville
|
......the comfort ride type are the Nivomats....if you lift up your bonnet and look at the Vehicle Identification Plate at the centre of the bulkhead....follow the diagram below and you will see that where the red line ends on the plate there will be sets of numbers...you want the third set from the right which as an example it says 1A....look at whats printed below and it will tell you if you have Nivomat or W/O Nivomat, the part No. is on the left and the marked code on the right......So if you have on the plate 3C then you have part No.30616683 W/O Nivomat.....These are for all 2001
Nivomat 30616715 marked 1F,2F,1D,2D 306167716 marked 1E,2E W/O Nivomat 30618110 marked 1A,2A,3A,4A 30618111 marked 1B,2B,3B 30616683 marked 1C,2C,3C 30623887 marked 1B,2B,3B ....
__________________
Mercedes C320CDI Sport Estate 3 litre V6 7 Gear Auto Remap 290bhp 628Nm torque @ 1600revs 45.1mpg |
The Following 4 Users Say Thank You to 960kg For This Useful Post: |
Sep 15th, 2009, 12:35 | #4 |
Master Member
Last Online: Dec 1st, 2010 23:19
Join Date: Jan 2008
Location: darlington
|
Oh and you can use the old springs and strut tops, or should i say you need to. The spring, strut top and strut itself are all separate.
I have just done a how to for removing and replacing the rear struts but haven't been able to get the pictures reduced yet. When i do ill post them Last edited by thebigv; Sep 15th, 2009 at 12:36. Reason: Missed something out. |
Sep 15th, 2009, 13:42 | #5 |
VOC Member
Last Online: Mar 26th, 2024 10:49
Join Date: May 2007
Location: CARDIFF
|
there is a nivomat option on the comfort, but it is not very common.
if you look at the spring code as stated; for a V40: position 4+5 sports nivomat=2E dynamic nivomat=2F comfort nivomat=2D non nivomats position 5 A= comfort B= dynamic |
Sep 17th, 2009, 23:00 | #6 |
Senior Member
Last Online: Sep 1st, 2017 22:00
Join Date: Nov 2007
Location: liverpool
|
hey lads thanks for the info sorry about the late reply to this thread been up the wall playing with a damp caravan
|
Sep 21st, 2016, 19:37 | #7 |
New Member
Last Online: Jun 3rd, 2022 16:08
Join Date: Jun 2016
Location: Newcastle
|
Rear Shocker V40
I Just sent off for Two Shockers for my 51 Plate for about £79 They are Meyle shockers with the numbers 526 725 0006 ----09 F 15 and when I Pressed the Rod down to the Bottom it takes about 20 seconds for the Rod to reach to the Top Will this Give me a softer ride when I hit a Pot Hole: just at the Moment When I hit the Damn things I feel as though the Base of my spine has been hit with a sledge hammer Just at this Moment if I Hit a corner at not so great a speed I can feel the Back end Slide from side to side
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|