PDA

View Full Version : Some free stuff


glasgowjim
Feb 17th, 2011, 19:52
Shortly after the 480 club europe forum crashed one member had his car written off so he asked me to dispose of some spares for him


a set of touch up paints colour 305 (this is a touch up paint + the lacquer to go with it).

1992 owners manual in original folder for volvo 480.


cost of postage only and I accept paypal

if you want any of the above then pm me , on a FIRST COME BASIS.

Shadow
Feb 17th, 2011, 22:59
hi jim its derek. just to see if you know what has happened to the 480 europe site. also is the touch up kit 305 metallic black?

glasgowjim
Feb 18th, 2011, 18:59
hi derek yes its the official volvo paint 305 touch up kit + plus I have a couple of intercoolers and some tubing left aside for you.

dont know what happened to it have emailed around but no one has got back to me so they may have just called it a day.

the spam was reaching epic levels and getting into the porn stuff as well .

seanin
Jul 19th, 2012, 16:06
dear glasgowjim,my name is sean i live in goldres green london,i am looking for a clutch cable for my 1992 silver surfer 480 es,the clutch starts sqeaking after about 15 mins driving and im no expert but i am thinking its the cable or could it be the clutch itself,thank you for taking the time to read this,my email is seanyallop@msn.com

glasgowjim
Jul 20th, 2012, 21:03
sean your email addy was rejected.

register on the 480 club europe website and I can contact you easily. here is a copy of the message I tried to send to you..
try the 480 club europe forum as the VOC forum is mainly 440/460 owners. I moderate the 480 forum as "glasgowjim" LOL .

The cable is not likely to cause a squeak. If the clucth starts to squeal and the bite point is very low or high you can adjust it easily with a couple of spanners. If the squeak is coming from the pedal area and not the engine then spray wd40 on the pivot point , oh and before you do that check the celtic cross shaped connector linking the cable to the pedal has been fully tightened up (its awkward but easy job). You can absolutely eliminate the cable from any squeak by lossening the end at the engine (noting the number of turns) and holding it up high puor oil / wd40 or anything else you like down the cable. TBH if it was the cable it would squeak everytime you pressed the pedal down.
Hope this helps. I seldom come onto this site so register on the 480 one if you want quicker responses.

regards jim

glasgowjim
Jul 20th, 2012, 21:04
All free stuff now gone a long time ago......