PDA

View Full Version : Breaking 480 Es 1993 2 ltr


glasgowjim
Apr 6th, 2011, 20:43
Breaking 480 Es 1993 2 ltr

all parts available , accept paypal , will post to anywhere in world at cost.

glasgowjim
Apr 10th, 2011, 01:10
I dont have 30 posts yet so I can not reply to any pm's sorry about this .

So you need to pm me with an email address so I can email you.

glasgowjim
Apr 10th, 2011, 22:32
have over 30 posts now

jakobandhismakarov
Apr 13th, 2011, 11:36
Have PM'd you about rear light clusters. Funds waiting if you have them.

glasgowjim
Apr 15th, 2011, 14:29
Amonra took up the offer sorry.

glasgowjim
May 4th, 2011, 22:08
parts already taken are

front and rear clusters.
info centre
OSF wing
door cards
drivers door locking mechanism
upper half of air filter box.

AcidicDavey
May 5th, 2011, 22:52
What is the corner of the dash fascia like? Mine's a mess because of the damn sun!
Also after a heater matrix like you read on the 480 club. She's an AC model as she's a Celeb'

Cheers,
Dave

glasgowjim
May 5th, 2011, 23:09
pm ed you on club 480 europe site , the heater matrix is the same regardless of aircon / non aircon.

I do have a number of spare dashes with either no cracks or a single small crack on edge certainly a lot better than the stuff you have been offered so far. Please contact me via 480 forum rather than here as I dont come on here that often.

j8tro
May 8th, 2011, 09:58
Hi Jim, How much would you want for the Throttle Body? Thanks

brooklands
Jul 8th, 2011, 13:15
My friend is looking for a foglight (drivers side) for his newly acquired 480. Can you give me some idea of how much you want?

Many thanks!

glasgowjim
Jul 8th, 2011, 23:59
there are 2 styles of front foglight depending on year of manufacture !

just sold a matching pair of late model 1994 front fogs at the weekend there.

brians
Sep 13th, 2011, 13:21
Breaking 480 Es 1993 2 ltr

all parts available , accept paypal , will post to anywhere in world at cost.

n/s driving light

glasgowjim
Sep 14th, 2011, 09:54
Brian do you mean the glass lensed light to the left of the indicator cluster ?

if so yes I have spares of these £10 includes uk postage.

stevietink
Sep 24th, 2011, 02:36
Are the rear lights in good condition and if so how much would you like for them?

cheers,
Steve.

stevietink@hotmail.com

glasgowjim
Sep 25th, 2011, 18:22
Sorry rear light clusters were the first to go.

Volvo Dave
Oct 22nd, 2011, 19:51
Do you still have the speedo sensor or did it go with the info centre ?

ourwillie
Mar 20th, 2012, 08:35
Breaking 480 Es 1993 2 ltr

all parts available , accept paypal , will post to anywhere in world at cost.

DO you have both the wiper and indicator stocks in working order if so a price please?

glasgowjim
Mar 20th, 2012, 21:21
yes I have wiper and indicator stalks available . You have a pm.

ourwillie
Apr 2nd, 2012, 10:43
I appreciate its a while since the original post but is the cem unit still available ?

glasgowjim
Apr 3rd, 2012, 00:09
Yes a working (and tested) CEM 3 £30 includes uk postage.

ourwillie
Apr 3rd, 2012, 17:24
Jim can you hold it for me and I will remove the old one tonight and let you know tomorrow please?
Thanks

glasgowjim
Apr 3rd, 2012, 21:39
ok will do

regards jim.

ourwillie
Apr 4th, 2012, 08:47
Thanks Jim as you may have read on the other post I tried last night without success I will be at it today again and let you know asap.

glasgowjim
Apr 4th, 2012, 10:16
dont worry about breaking the handle as I will throw in a replacement handle free of charge for you.

will even do that if you dont need a cem as well just cover the postage.

ourwillie
Apr 4th, 2012, 20:19
Was at the car today and the handle came off ok I have two of the loom plugs removed but the third is proving to be a bit of an obstacle thats the akward placed one of course the one next the door frame! typical. So left it tonight with the intentions of removing the two torques screws at the end of the dash see if it makes it any easier to get at. I assume Jim that the one you have will fit this 480 es auto 1994?

glasgowjim
Apr 4th, 2012, 23:26
removing the 2 torx screws at the side of the dash the ones covered by the little plastic plate will make no difference to removing the connector you are just going to give yourself a lot of extra work and grief. I have removed several of these cems you just have to be patient and fiddle away at it.

ourwillie
Apr 5th, 2012, 08:31
Ok thanks Jim do the clips at the side of the plug squeeze in or what before release from the pins? What an akward place to put something? especially with those looms squeezed in there!

ourwillie
Apr 5th, 2012, 14:03
Well Jim finally have the cem removed found the other screw behind another pile of wires what an after thought this seems to have been! Anyway I take it these items are not coded to a particular car? So the one I have off is a cem 111 pt no 50k 004 696 10 is yours the same ? if so let me know please asap and will get you sorted please.

glasgowjim
Apr 7th, 2012, 23:35
all cem 3's are the same , will post out on ondays mail first class .

thanks jim.