PDA

View Full Version : Xc90 oil cup wrench size?


Argyllt6
Oct 27th, 2014, 20:14
Looking to buy an oil filter cup wrench after struggling to get the outer oil filter casing off using a filter strap on my 04 plate xc90 t6. I eventually got it off . Doesn't give you much room with the strap.

Can someone confirm the exact size please.?

Looking at One that's 86mm with 16 flats on Amazon at the mo'..

http://www.amazon.co.uk/gp/aw/d/B009VFQTFK/ref=mp_s_a_1_5?qid=1414440878&sr=8-5&pi=AC_SX110_SY165

Cheers

JohnL
Oct 28th, 2014, 20:15
Are talking about the fuel filter in the rear or the engine oil filter housing top on the engine in the front?
John

Colger23
Oct 29th, 2014, 12:40
Check the thread http://www.volvoforums.org.uk/showthread.php?t=216817

This says the oil filter requires a 36mm wrench !! hope this helps

cheshired5
Oct 29th, 2014, 13:00
Check the thread http://www.volvoforums.org.uk/showthread.php?t=216817

This says the oil filter requires a 36mm wrench !! hope this helps

That thread is a D5 and the o.p. has a T6.
Is the T6 the same?

Argyllt6
Nov 1st, 2014, 20:54
done some reearch and looks like it might be 87mm with 16 flats definetly alot bigger than 36mm.

going to take the skid pan off again and measure it for its next oil change

its the t6 variant

cheers