PDA

View Full Version : rear seat belt warning


dawson
Jan 27th, 2015, 17:35
In my car I am gettig the same warning every time I start the engine now.

It says "left rear seat belt in use" then diappears and come straight up with" no seat belts ib use"

Was wondering if it can be reset or has anyone had this issue before??
It starting to do my head in.
Cheers mike

Clan
Jan 27th, 2015, 19:33
In my car I am gettig the same warning every time I start the engine now.

It says "left rear seat belt in use" then diappears and come straight up with" no seat belts ib use"

Was wondering if it can be reset or has anyone had this issue before??
It starting to do my head in.
Cheers mike

Are you opening the rear doors before setting off on your journey perhaps?

dawson
Jan 27th, 2015, 20:18
Nope. I am not using the back doors at all. It is a strange one for me.

x DTR x
Jan 27th, 2015, 20:44
I get this a lot, not sure if it's because i have a child seat in the back and the seat belt is always in?

dawson
Jan 28th, 2015, 00:27
But mt problem is there nothing on the back seats nor seat belts connected.
It seems to be a puzzler then

x DTR x
Jan 28th, 2015, 12:44
If you press the read button on the end of the stalk, it usually cancels the message.

iainmd
Jan 28th, 2015, 15:07
Sounds like the sensor in one of your seatbelt sockets in the rear seat may be shorting intermittently. Doubt that will be an outrageously expensive fix.

dawson
Jan 29th, 2015, 00:56
So you think just replacing the seat belt clicker thingy mi jig wid be a good shout. Was thinking it could be that.

iainmd
Jan 29th, 2015, 07:41
Sounds likely. No guarantee but that's where I'd be looking first.