V50 wing removal

[volvomarshall]

Does anyone have experience of removing a 2005 v50 front wing, is it just bolts and screws etc. if anyone has any knowledge I would be most grateful.

Many thanks

[torroa]

I guess you are talking about the front fender?

You need a T25, T27, and an 8mm pipe with extensioner

* Remove the front bumper
* Remove the inner plastic fender
* Remove the lower side sill/skirt
* 3 screws holding the fender at the A-pillar
* 4 screws at the top of the fender
* 2 screws holding the fender to the front section

Any 2004-2012 fenders from either a V50 or S40 should fit directly.

[Tony500]

If your car comes with mudguards, then you will have rivets too.

And once your wing is off, remove they sponge type thing that you see.... Just caused rust