yorkymort
Oct 20th, 2015, 12:28
Problems with engine cutting out on 2007 S80 D5 then will not start until electric connection on injector is removed and refitted, this has happened on previous occasions with the car having to be towed into local stealership.
This problem seems to affect cylinders 2 & 5. Have pulled out codes which are exactly same for both cylinders mentioned, codes are as follows :-
ECM- P155200 and ECM- P155500 ( I would assume that last 3 digits are the cyl number ) the code then reads same for both cylinders, Cylinder 2 Injection Circuit Range Performance, General Failure -No sub type information.
Can anyone offer a solution ie. Is this a wiring or injection problem? I need to sort this as my wife will not drive this car due to lack of confidence in its reliability. Any advice gratefully received.
This problem seems to affect cylinders 2 & 5. Have pulled out codes which are exactly same for both cylinders mentioned, codes are as follows :-
ECM- P155200 and ECM- P155500 ( I would assume that last 3 digits are the cyl number ) the code then reads same for both cylinders, Cylinder 2 Injection Circuit Range Performance, General Failure -No sub type information.
Can anyone offer a solution ie. Is this a wiring or injection problem? I need to sort this as my wife will not drive this car due to lack of confidence in its reliability. Any advice gratefully received.