Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > Blogs
Register Members CarsBlogs Help Calendar Mark Forums Read

Notices

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Old

Steel wheel covers

Posted Jun 9th, 2018 at 13:25 by BrianH

These are the ones with integral Volvo Logos. Not the stuck on type.

They an be difficult to clean with long exposure to brake dust.

One solution: Dump trim in the sinlk and spray with wheel cleaner, with gloves on. Then use a strip of 600 wet and dry, to get down to colour. Its hard work but well worth it. If in the unlikely event you go through a paint layer, dry and use Matched Volvo spray paint. If as I suspect this now impossible I use Vaxhaul LV 163C 16/16. A...
VOC Member
Posted in Uncategorized
Views 1133 Comments 0 BrianH is offline
Old

Offside/Left righthand side head light. Tight slot problem

Posted Apr 14th, 2018 at 18:24 by BrianH

Changing a H4 headlight bulb I broke the plastic reflecter positioner, the bottom one of course. The reflector shot upwards only supported by the back rubber. I did get some flashes from that before I realised the problem.

Brookhouse sent 6 replacements for 18 in two days. Just finished the installation.

Could'nt get the insterts to locate at all on the reflector. The slot that allows the the rotation is too narrow. Took to the small hacksaw to open up the slot. As...
VOC Member
Posted in Uncategorized
Views 1930 Comments 0 BrianH is offline
Old

Poppet valve on the tempory B230E

Posted Apr 10th, 2018 at 18:10 by BrianH

The head was soft (unknown age) and when it was refurbished, I gave the wrong instruction...........got it wrong 2

Alex to put the B200E head on from the orignal engine (1989). Cost 702. Belts, idle bearings etc. all done to. Gearbox oil changed to Amsoil sythetic synco to improve bulking, about 85% better. Ouch again.

In 12 months this car has doubled its cost per mile. But now I have reached a calm period.

Now running really well. So pleased. The...
VOC Member
Posted in Uncategorized
Views 1115 Comments 0 BrianH is offline
Old

Head lights. Bewarned

Posted Feb 26th, 2018 at 17:53 by BrianH

The main metal relay behind the glove box has over heated agian over many years though.

The muti plug behind the glove box, starts to melt and effects the spade connection.

Beware although I have 21w running lights I offen use my head lights during grey days

In heavy rain on a fast dual carriageway I did'nt know the headlights were not on. No warrings no lights on the dash!!

The dip/head was becoming intermitant on the stork so replaced....
VOC Member
Posted in Uncategorized
Views 1342 Comments 0 BrianH is offline
Old

Rear wheel plastic inserts.

Posted Dec 22nd, 2017 at 17:18 by BrianH

These were not installed.

Disappointed............... As Alex said the rear wings were not strong enough to take self tapped screws which hold the inserts inplace around the rear wing.

OK. Next year.
VOC Member
Posted in Uncategorized
Views 1420 Comments 0 BrianH is offline

All times are GMT +1. The time now is 09:42.


Powered by vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.