Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > Blogs
Register Members CarsBlogs Help Calendar Mark Forums Read


  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and users. Forum owners such as us are finding that AOL, Yahoo and are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox


240 1989 axle

Posted Sep 25th, 2018 at 18:40 by BrianH

Mobile again.

I made the mistake of using a ABS post 1993 axle thinking it would work on a 1989 pre ABS axle.

The speedo didn't work.

Ryan of Speedy Cables said the pulse of the ABS is 48 where as the non ABS, was 12 from the axle.
This required a little electronic box built to convert between the two.

It worked well only thing was the car was off the road because of their lead time of 5 weeks!!!

VOC Member
Posted in Uncategorized
Views 4496 Comments 0 BrianH is offline

Steel wheel covers

Posted Jun 9th, 2018 at 13:25 by BrianH

These are the ones with integral Volvo Logos. Not the stuck on type.

They an be difficult to clean with long exposure to brake dust.

One solution: Dump trim in the sinlk and spray with wheel cleaner, with gloves on. Then use a strip of 600 wet and dry, to get down to colour. Its hard work but well worth it. If in the unlikely event you go through a paint layer, dry and use Matched Volvo spray paint. If as I suspect this now impossible I use Vaxhaul LV 163C 16/16. A...
VOC Member
Posted in Uncategorized
Views 6299 Comments 0 BrianH is offline

Offside/Left righthand side head light. Tight slot problem

Posted Apr 14th, 2018 at 18:24 by BrianH

Changing a H4 headlight bulb I broke the plastic reflecter positioner, the bottom one of course. The reflector shot upwards only supported by the back rubber. I did get some flashes from that before I realised the problem.

Brookhouse sent 6 replacements for 18 in two days. Just finished the installation.

Could'nt get the insterts to locate at all on the reflector. The slot that allows the the rotation is too narrow. Took to the small hacksaw to open up the slot. As...
VOC Member
Posted in Uncategorized
Views 7178 Comments 0 BrianH is offline

Poppet valve on the tempory B230E

Posted Apr 10th, 2018 at 18:10 by BrianH

The head was soft (unknown age) and when it was refurbished, I gave the wrong it wrong 2

Alex to put the B200E head on from the orignal engine (1989). Cost 702. Belts, idle bearings etc. all done to. Gearbox oil changed to Amsoil sythetic synco to improve bulking, about 85% better. Ouch again.

In 12 months this car has doubled its cost per mile. But now I have reached a calm period.

Now running really well. So pleased. The...
VOC Member
Posted in Uncategorized
Views 5299 Comments 0 BrianH is offline

Head lights. Bewarned

Posted Feb 26th, 2018 at 18:53 by BrianH

The main metal relay behind the glove box has over heated agian over many years though.

The muti plug behind the glove box, starts to melt and effects the spade connection.

Beware although I have 21w running lights I offen use my head lights during grey days

In heavy rain on a fast dual carriageway I did'nt know the headlights were not on. No warrings no lights on the dash!!

The dip/head was becoming intermitant on the stork so replaced....
VOC Member
Posted in Uncategorized
Views 4961 Comments 0 BrianH is offline

All times are GMT +1. The time now is 15:56.

Powered by vBulletin
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.