Cheers
I thought he did, but I did get a response from him previously to say his wouldn't work with my XC90. Has he only just got DICE. Mark |
I have dice and my mate has an xc90 it depends if you want codes reading or something that needs software downloading as he has had dice a while now.
If you need something urgent and can't get hold of mike and can make the Reston meet at the weekend I will be there with the kit |
Thanks it's not really urgent, just want to get to bottom of problem sometime.
Basically I'm getting the "engine service required/limp mode" problem on my XC90. My code reader shows no codes, but pending Turbo wastegate fault. Really wanting to do the sort of tests suggested on wastegate/solenoids etc. Can DICE do that or is VADIS/something else needed. Mark |
Vida should be able to do all that Vadis is just older software
|
Cheers
Now I am confused though is Vida the same as Dice? Mark |
VIDA is the PC software, DICE is the cable/dongle
|
Hi Mike, Recently acquired a 2003 C70 T5 Convertible and wondered if I might take advantage of your generous offer. Currently in Wakefield so could meet almost any time that's convenient.
Regards, David |
Reader
Quote:
Thanks for the prompt reply, I don't suppose you can suggest anyone else? I am actually between Retford and Gainsborough about 15 ml from Lincoln. Alternatively can you advise a suitable reader, they seem to be cheaper than previously but you need to source the right one. I bought one for £140 ish back at the time you helped me, but could not find a computer which had the right software and sufficient RAM and running early software. The pressure was off so I did not pursue it, now I wish I had. Cheers Phil |
Hi Guys / Gals,
Just a quick one. I have just got hold of a Icarsoft i906, and this will read ALL Codes from Saab and Volvo. So if anyone that is in my area, (Bangor, Co Down N.I.) want, needs their codes read then pm me, (a pint or two will cover it) cheers all joe. |
so if you guys are real good at figuring out the c70 problems can you tell me this? i just got a 99 c70 and i found it had a bunch of cluster bulbs out, so i took off the dash and removed the cluster after disconnecting the battery. and i sat that way for about a month while i found bulbs for it. anyway the top worked before i did all this and now i get the rops lamp and the top only raises the back window and no more. the windows go down as they should. the rops lamp did not stay on before i'm sure it came on and then off. but it may have been burne out as well now i can't remember. can the rops keep the top from working? or do i need to look more? thanks
|
All times are GMT +1. The time now is 07:32. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.