Garage Clearance, some rare parts.
 

Ok as SWMBO is in my ear about wanting a new kitchen, and as that cant happen until i take down my garage and rebuild it whilst extending out back to create the new kitchen, i need to empty my garage of various treasures and not continue with my planned 240 Turbo Project.

So below is parts that were going to go in the 240Turbo Project plus other bits that i’ve kept after breaking cars knowing i’ll have a use for them one day. But if they go they go and i don’t have to move them about or find a place to store them whilst i loose my garage space. But if they don’t i’ll just keep em for that day i do have a use.

All prices are collected from near Wellingborough,
Shipping can be arranged at buyers cost
or i can bring to BKV on Sunday for the parts that will fit in my 740 saloon.

63K mile FK bottom end, have fitted a new rear main seal. Front seals are untouched as originally engine was going in a 940 turbo, then id planned to change the front seals whilst putting in an aux shaft to run a block mount dizzy.
http://www.chesh.co.uk/volvoparts2014/dsc_0210.jpg
http://www.chesh.co.uk/volvoparts2014/dsc_0211.jpg

£100 for the bottom end, please note alternator ,aircon compressor, exhaust manifold not included

http://www.chesh.co.uk/volvoparts2014/dsc_0209.jpg

Currently it has bolted to it a freshly skimmed 531 head with a IPD Turbo CAM installed and shimmed up. The 531 has also had ports drilled and tapped in the intake passages so that LPG can be used. If you’re not going to use LPG then these can just be blanked off.

£250 for the head and Cam

£325 for the bottom end and head/cam bolted together as it stands with the new Volvo headgasket & new cambelt.

http://www.chesh.co.uk/volvoparts2014/dsc_0215.jpg
940 Turbo intake Manifold complete with injectors £15

940 Turbo starter Motor £15

http://www.chesh.co.uk/volvoparts2014/dsc_0230.jpg
15G conical Flange turbo, came of a 1994 850Turbo, 120k full service, drove this car for 3,000miles before i broke it ran fine. £75

http://www.chesh.co.uk/volvoparts2014/dsc_0214.jpg
Late Style intercoolers with centre inlet and Exits £10 each
940 Efan £25

http://www.chesh.co.uk/volvoparts2014/dsc_0217.jpg
940 Dual Mass flywheel and 10,000mileold clutch £50
LH2.4 Dogdish Flywheel with Diesel Clutch kit done 15,000 miles £150
LH2.4 dogdish flywheel no clutch £50

http://www.chesh.co.uk/volvoparts2014/dsc_0212.jpg
M90 Gearbox with shifter and linkages, no Propshaft, done over 200k but had oil changed every 20k by previous owner who travelled extenstively in Europe £50

http://www.chesh.co.uk/volvoparts2014/dsc_0213.jpg
M90 Gearbox with shifter and linkages, no propshagt, came on a 940 sport i broke, had done 180k miles and drove 250 miles back from Scotland fine. £50

http://www.chesh.co.uk/volvoparts2014/dsc_0216.jpg
940 Stock Downpipes, perfect for cutting and shutting to make a 240turbo downpipe £15

http://www.chesh.co.uk/volvoparts2014/dsc_0224.jpg
940 Turbo 3 inch Downpipe, has concial flange then welded to 2 90degree jetex bends. Ready to accept rest of your home built exhaust system of 3 inch pipe underneath. £30

http://www.chesh.co.uk/volvoparts2014/dsc_0219.jpg
Complete 700/900 Tool set. Includes numerous bits for screwdiver, different sizes of Torx ETC £20

http://www.chesh.co.uk/volvoparts2014/dsc_0227.jpg
700/900 Lower chassis Brace £15

http://www.chesh.co.uk/volvoparts2014/dsc_0228.jpg
700/900 Rear Nivo’s came of the 940 Sport i drove back from Scotland, it remained at correct level £50 the pair.

http://www.chesh.co.uk/volvoparts2014/dsc_0220jpg
Unused Mocal Oil Cooler kit for 4cylinder redblock engines. Comprises 16ROW mocal 230mm 1/2BSP Male oil cooler Part Number 0C5163-8 & Volvo oil filter take off and stainless pipes, Part Number OCIT280
Purchased from http://www.thinkauto.com , cost £230ish £130.

http://www.chesh.co.uk/volvoparts2014/dsc_0218.jpg
700/900 grey cupholder armrest. Probably benefit a good clean £20

http://www.chesh.co.uk/volvoparts2014/dsc_0223.jpg
1, yes Just one Genuine Volvo Polaris Alloy, in need of refurb, was my spare wheel. Has tyre on it, but it doesn’t hold air, needs refurbing. Perfect if you’ve buggered one of your set of 4, or you want a spare for your set. £200

https://fbcdn-sphotos-b-a.akamaihd.n...53430046_n.jpg

Genuine Volvo 700 Series Aero Bodykit, comprising of Front Skirt, Side Skirts and Rear Skirt. Fits Mk1 700 series bumpers. £300 Picture above is example ofAero Kit, mine is in the loft and painted a dark shade of red.

Thats is for now, may have a real sort through the garage and see what else i turn up.

Dibs on solid flywheel, unless it's a different one to the one we spoke about Chesh. Can you PM me a payment method for that and the other things we arranged?

Also dibs on a dog dish flywheel please, just need to message my mate about it as it's for him.

Hi Chesh,
I will take the engine with head and ipd Turbo cam plus oil cooler kit please and the 3" downpipe.
Will pick up next week and send deposit if required.

Ok pms replied to.

engine block and head sold
Oil cooler kit sold
3inch downpipe sold to revolvr

Dogdish flywheel sold to filthyjihn

Derv clutch kit for dogdish flywheel sold to max

E fan sold to suterman.

Dogdish flywheel on option to 360beast

Hi Chesh,

just touching base and you have my deepest sympathy...........so the mighty has spoken eh' and the Volvo project gets put under the kitchen sink so to speak....ouch!!..... good luck....... a bunch of flowers works wonders!........ sometimes.

Andy

Bitzzz
 

Up for the better M90 and the nivos, toolkit and chassis brace (shouldn't there be two, one each side?)

Would the aero kit fit a 940 saloon

Arm rest please PM sent

The Chassis brace is fitted between the two main chassis rails underneath between the engine and gearbox.

If you look on your 940 Sport It should already have one, I think all Turbo cars did have them, most NA cars didnt. Worth checking to see if yours doesnt already have one.

Below is a pic of an IPD one fitted to show you where to look, i think most American 700's and 900's didnt have them hence IPD making there own version to sell.

http://www.ipdusa.com/uploads/images...lsize_5495.jpg

You'd be suprised how much the chassis can flex, as to fit them you have to ensure the car is on its wheels, as having it jacked up on one side will mean the chassis flexes and the bolt holes go out of alignment.

Unfortunately not.

The side skirts would fit but the front and rear parts only work with early style bumpers.

What you need is the elusive Front and Rear add on Skirts for a 940. I've only ever come across the front piece, the back bit is harder to find.

Armrest/Cupholder Sold Wrinkles, collect at BKV

Better M90
Nivos
Toolkit
Chassis Brace (if Roger's doesnt allready have them)
Sold Roger the Chorister.

I think i have some more lower Chassis braces if people are interested.

Having a further tidy up in the garage loft.

900 D Pillar Trims with built in Speakers £30

http://www.chesh.co.uk/940red/speakers.jpg

960 Red Clear Clear Red Rear Lights £15 per side, one of them you'd have to take the studs from your old light and screw into them as they went missing see pic below.

http://www.chesh.co.uk/volvoparts/dsc_0122.jpg

http://www.chesh.co.uk/volvoparts/dsc_0123.jpg


940 Headlights & Wipers £5 per side I WILL NOT POST THESE, Also another set i'll get picture later

http://www.chesh.co.uk/940red/headlights.jpg


940 aircon pipework £40

http://www.chesh.co.uk/940red/aircon.jpg

700/900 estate Tailgate spoiler with built in LED High Level Brake light £100

Comes with spare brake light LED strips. Was on my old 740 Estate 10 years ago.

http://chesh.co.uk/745pics/andy7.jpg


700 & 900 with LH2.4 Turbo + Kits £10 dont know if they work, but fun experiment for anyone or spares for there own Turbo +, personally i'd fit MBC

http://www.chesh.co.uk/940red/turboplus.jpg

740 Saloon rear rollerblind sunblind for parcel shel £30

http://www.chesh.co.uk/volvoparts/sunblind1.jpg


V90 Rear wiper arm cover grey £10

http://www.chesh.co.uk/volvoparts/dsc_0116.jpg


Will post some more later.

I'll take the two red/clear 960 rear lights if they are still available?

Have you by any chance got a drivers door handle with the chrome insert for a 760.?

I'm thinking it was only a few models that had them. My LPT Classic didn't, but I can second that they do make a nice improvement to front end responsiveness and control. If only it was possible to make the rear end behave as well as the front.

(Sorry, slightly irrelevant post)

Ok thanks just thinking out loud that's all .i have a 850r front bumper and 960 rear bumpers fitted already .wish I could get some side skirts too .

Would 960 skirts not do for you, Smithy??

Sorry, as you were ;)

I've thought about them already but I like the bodykit ones like on that blue 740 .but I can get some 960 saloon ones this weekend if no joy with anything else

Headlights
 

I definitely want the headlights and can collect when I come for the M90 and other bits...

And
 

And the DMF with clutch so long as the springs in the DMF are still good.

I have chassis braces on the two sports and the 760T, but not on the B234F 740 GLT, so I'll want one please. I can probably get up to you (is it still the same place? I'll need to be reminded of address and postcode) weekend of the 5th July if SWMBO can wait that long. I'm also in general up for coloured 940 front and rear sidelights/lenses.

If there's a nice but not too costly hotel near you I might treat G/F to an overnight break if she can find a liontamer to take the kids! Incidentally a very nice woman who lives in my village is of "carny" descent and one of her grandfathers was a liontamer - until he got eaten by the lion. True story!

Flippin 'eck...

The the worst that would happen if i had a bad day would be a flooded house.

Suppose I could drown if I was in a cellar! ;)

Steve

If in the unlikely event the armrest isn't collected at the BKV I would be very very interested, it looks like its my grey trim!!

PM'd you mate :)

Collection
 

PM me about collection please Chesh

Another Part.

Locker from my 940 Sport which had the 1041 axle. I busted the axle casing when the bolt that holds the torque rod sheared off, so casing was scrap. Sat in the garage for a few years now with the intention of fitting it in my 240 axle as per this write up on turbobricks

http://forums.turbobricks.com/showthread.php?t=84755

Still perfect for someone else to that, and one way to get a locker in a 240!!!!!

£50 Collected or Plus Postage or Free Delivery to BKV

http://www.chesh.co.uk/volvoparts2014/dsc_0236.jpg

Sent you a text regarding the locker if no one else has claimed it yet.

brian
 

Hi,

If you still have the lower Brace, I would like to purchase it.....I have a 940 LPT

that would benefit fitting the brace.

I am only in Northampton and could easily pick it up.

You could phone on 01604 492285 or E mail on brian_canavan@hotmail.com

regards

brian

Locker sold to Antz.

Polaris Alloy Sold to MadMatt

940
 

hi chesh740 are you at national sunday if so what car reg to look out for ?

Look for a black E reg 740 Turbo with a T5 engine installed. That'll be me.

15g turbo
 

Still got the 15g turbo?
Is it already clocked for the rwd?

Pm me if you like!

15G has provisionaly already been sold im afraid. If the buyer pulls out i'll send you a message.

OK the BKV is on tommorrow.

I have the following parts to take with me tommorrow.

Suterman 940 Efan

Wrinkles Arm Rest with cupholders

57KRL D pillar Trim Speakers


For everyone else that i need to post stuff to, i will get it boxed up and let you know shipping costs.

For those that are collecting, i will let you know what days work for me.

Sorry to hear about your loss of storage. Hope the BKV was better on the Sunday.

Would you separate a lambda sensor from down pipe, and how much to post?

Thanks - Dan C

Has the 15g now left the building?

No meaning to be a mider, just want a less stressed turbo/something to do!

now then chap, is the M90 still knocking about? I've managed to lose 3rd quite spectacularly on mine.

Would you have any 940 hoses? I'm desperately seeking the top heater hose - Volvo pn 1328109
Regards
Paul

940 tdi auto 1995
 

hi do you have a steering pump that fits my 1995 940 tdi if so how much?

Yes I have one left, drop me a pm if interested.