Dog Guard - Fitment
 

There is a high chance that this is just me being a complete and utter noodlebrain, but can't work out how to fit the divider section of my dog guard together.

Bottom bit of the main guard - OK

https://preview.ibb.co/hmmGjd/IMG_20180611_131352.jpg


Bottom of the divider goes through the slot - assume it just rests there and isn't affixed as such?

https://preview.ibb.co/fXmSqJ/IMG_20180611_131405.jpg


Rearmost part of the divider, I'm aware I'm missing a leg or something to jam it against the roof with.

https://preview.ibb.co/j2e2Pd/IMG_20180611_131412.jpg


But this is the bit that's stumping me. Which way up does the hinged clamp bit go, and how does it affix to the main guard? I feel like I'm missing a piece or a bolt here........

https://preview.ibb.co/jnvnqJ/IMG_20180611_131359.jpg


TIA
Rob

I would say that it should be identical to the bracket in your 2nd photo.
I.e. It looks like you are missing a truncated, triangular plate, with a half-round gutter, and a bolt.

Have you studied the official Volvo photo?
https://accessories.volvocars.com/Ac...0/0a/e1/bf.jpg

And here are the official Volvo Installation Instructions for the Load Compartment Divider:
https://accessories.volvocars.com/In...XC90(-14)/2009

Champion! Was looking for that everywhere! Ta