Pipe from MAF
1 Attachment(s)
Attachment 118094
Does the nipple with electrical connector attached come out of that pipe. I was going to clean it The end of PCV hose connects to it and I didn't want to just pull it out but it does twist slightly Cheers, Mark |
Yah, it has a lip on it like the one near the connector, you have to pull quite hard to get it out. Might break it.
https://www.do88.se/bilder/artiklar/...88-kit21_5.jpg |
The component (heater) just pulls out. I think its intended to stop the pipe clogging (along with the insulator pipe).
The nipple is part of the pipe. |
Don't grind off any parts of it, it will shoot out when the turbo dumps. I've a jubillee clip and a 1 way valve on mine to stop oil leakage with extra boost on.
|
Might just leave it where it is then:teeth_smile: Seemed quite clean when I pulled PCV hose off.
|
All times are GMT +1. The time now is 10:26. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.