Door protector strip-removal
Hi All.
Mine is an old XC90, with the original styling, ie. Silver car with black door handles and black strips on doors. This makes the car look quite dated. So, I've painted the handles to match the body work and they look really good. Now I'm considering painting the plastic door protectors to match. Question is: How to remove them? I've had a look today and they look like they are held on with self adhesive foam tape. If they are, then great. I'll get some more tape and take them off. But, before I go forcing things, does anyone know if there is anything else holding them on, screws, bolts etc? If I have to dismantle the door, then I probably won't bother. |
They are held on with tape or at least mine are 2005 my car. You will need to remove the indicators first otherwise you risk breaking them.
|
Quote:
Aidan |
3 Attachment(s)
Quote:
I considered taking the handles off, but that was too much work. I ordered the paint and laquer on ebay (code 426). SO, I masked the area. Gave them a light rub down with P800 wet/dry. Two handles were pitted, but this turned out to be laquer, so I rubbed them down to the paint. Then I primed with Etch Primer. It was a very warm day, so I didn't need to leave long between the coats. Two coats primer. Three coats of paint and four coats laquer. All four handles, about 3 hours all told. |
Thanks for the update Father Ted. It looks great on your car.
Well done. Aidan |
Nice job! Well done.
|
Cracking job. Wing mirrors as well would finish it.
|
Quote:
Think I need more paint!!!! |
You don’t need to take the whole wing mirror off. If you remove the glass you can then take the surround off leaving the mechanism in place.
|
Quote:
How easy does the glass come out? |
All times are GMT +1. The time now is 07:30. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.