Volvo Owners Club Forum

Page 2 of 2

Show 40 post(s) from this thread on one page

Volvo Owners Club Forum (https://www.volvoforums.org.uk/index.php)

- 300/66 Series General (https://www.volvoforums.org.uk/forumdisplay.php?f=12)

- - Aerial mount (https://www.volvoforums.org.uk/showthread.php?t=263483)

340man

Mar 14th, 2017 16:17

Tightening up the pivot of the aerial mount is easy, discovered today.

Unscrew aerial rod from mount, pull off plastic cover, tighten pivot screw.

Benji1985

May 14th, 2017 17:50

Quote:

Originally Posted by 340man (Post 2245790)

Better weather today, so I thought I would look at tightening the pivot of the roof aerial.

Did not go to plan, removed the interior lamp and the plastic crumbled in my hands, gluing it together now and reinforcing with epoxy adhesive. In removing a couple of screws retaining the trim panel, two screw bosses disintegrated, epoxy again. Given up doing the aerial for today!

I have a spare plastic, it is cracked but still strong

Ben

340man

May 14th, 2017 18:14

Quote:

Originally Posted by Benji1985 (Post 2274515)

I have a spare plastic, it is cracked but still strong

Ben

Hi Ben, it all repaired well with epoxy resin, cheap stuff from Poundland.

Once fitted, can't see any damage, and I think it's now stronger than original.

Thanks though Ben, much appreciated.

Benji1985

May 21st, 2017 21:39

Quote:

Originally Posted by 340man (Post 2274528)

Hi Ben, it all repaired well with epoxy resin, cheap stuff from Poundland.

Once fitted, can't see any damage, and I think it's now stronger than original.

Thanks though Ben, much appreciated.

no worries, glad it fixed :)

All times are GMT +1. The time now is 17:11.

Page 2 of 2

Show 40 post(s) from this thread on one page