Camshaft Position Sensor Location And Removal
The Camshaft Position Sensor (CPS) is located at the end of the Exhaust Camshaft on the Near Side (passenger side uk spec) of the cylinder head
It is retained by two Torx bolts... http://i35.photobucket.com/albums/d1...ossenpshop.jpg A faulty CPS is likely to show a DTC 3-1-4 and common associated problems resulting from a faulty CPS are poor running and general starting issues... The CPS detects the speed of the engine, whether at idle, acceleration or deceleration by noting when the camshaft is at TDC on the combustion stroke... Removal of the CPS is basic as is the installation of a replacement... As far as i am aware there is little value is attempting to service the unit...save to say that the resistance between the two sensor terminals should be within 200-500 ohms External view of unit removed.... http://i35.photobucket.com/albums/d1...Picture992.jpg Internal view of unit removed http://i35.photobucket.com/albums/d1...Picture993.jpg The external side plastic cover can be removed allowing access to the screws which hold the sensor backing plate to the man unit... http://i35.photobucket.com/albums/d1...Picture994.jpg However with the backing plate removed there appears to be little "self repair" to the sensor apparent... http://i35.photobucket.com/albums/d1...Picture995.jpg cheers jod |
All times are GMT +1. The time now is 06:44. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.