ABS & STC Fault
getting a message ABS FAIL STOP CAR ASAP and dash lights up like blackpool,
also message STC fault on vida getting ABS-0092 Control module communication ABS-0093 Control module communication ABS-0095 Control module communication CEM-1A5F Communication with ABS control module signal missing ECM-A02B Communication, control module for ABS faulty signal these will reset and will stay off for a while then randomly come back, sometime everything sometimes only the STC fault message. any idea's where to start looking? many thanks in advance |
Using VIDA establish, or fail to establish comms with the modules. If it cannot talk to the ABS module in any way, then you have either a catastrophic failure of the wiring (rare) or a power failure of the ABS module. The latter is my guess, but it’s only a guess.
I had a similar problem, and I cut the module open with a dremmal and then touched up all the solder joints with an iron. That worked for two years and then I had to change the brushes in the pump motor; two different ways of doing the same thing which was getting an increased potential difference across the pump windings. |
I have read somethings along those lines,
ordered a E5 socket and will give that a go, nothing to loose, also it being quite random it does sound like a poor joint |
little update on this.
got the E5 socket today, removed and cut open the ABS control unit, and yes found quite a few cracked soldered joints. clean and re-soldered those joints and sealed with hot glue. refitted unit, cleared all DTC's with Vida. not taken for a test drive yet, will be doing later hopefully being able to report back all clear |
right been out for a drive this evening,
got STC to engage got ABS to engage yet still no warning coming up so its a success :D |
Happy daze....
|
found pin 11 solder joint cracked,
pin 11 is one of the CAN BUS connections, no wonder it was loosing comms |
just a note of interest
there are quite a few videos on Utube about this issue, all of them seem to fail in curing the fault. yet mine worked, so don't believe everything you see :D |
All times are GMT +1. The time now is 12:17. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.