1800E Electric fan
Hi all, am considering installing an electric fan on my 1970 1800E. Am going to call a company called Revotec, which advertises in Classic and Sportscar, but before being baffled by the experts, I'd really appreciate any wisdom members can pass on. Thanks very much!
|
Hi.
I fitted a Revotec fan to my 1800E. Went with their high power 11" - 240mm blowing fan, mounted in front of the radiator using the universal fan brackets. Didn't use their recommended fan controller utilising the bottom hose, instead bought the threaded fitting controller EPC M22 x 1.5mm external threat + EFC M22 brass boss, braised the boss onto the top of the radiator and fitted the controller there. It appears to be working perfectly although the car's just been workshop run so far. I could take some pictures if you like, going over there tomorrow. David. Total cost Fan £77 Brackets £15 Threaded controller £65 Brass boss £9 |
sl; See my notes on ECF here: http://www.sw-em.com/Cooling_System....ic_cooling_fan
LJD; Top of Radiator is input side, and will be hot any time TStat is open and calling for cooling, so I expect your Fan to be running just about all the time...I prefer to only energize the ECF when Rad does not supply adequate cooling (hot outside air or slow roadspeed), therefore recommend placing temp sensor for ECF in bottom tank of Rad or Hose. Cheers |
Quote:
|
Quote:
however the Standard working mechanical Thermo viscous fan is best , it regulates it's self . |
Thank you both for such really useful replies. Much appreciated.
|
2 Attachment(s)
Guys not so I'm afraid.
In the early 80's the vehicle had a Kenlowe fan fitted with the thermostat mounted radiator top and the fan performed perfectly, just like the one in my Dad's Chrysler Avenger in fact. Lemur, sorry for this confusion, hopefully this'll help, these are my experiments with the Revotec templates. Pic 001 is the 10" fan template vertically mounted, 002 is the 11" horizontal. David. |
Thanks again and no worries re conflicting ideas. All good stuff!
|
LJD;
The system can certainly be characterized with sensor on the hot side, and I have seen where others installers do implement it this way...I have give my considered reasoning for putting it on the output side...it seems to me that so implemented, the fan will run only when system needs additional airflow, so I expect fan will run less than with sensor on the hot side...in the end, it is up to sl's decision... Cheers |
My opinion, for what it’s worth: David (post #7) is right.
It doesn’t matter where the temperature sensing element is placed on the radiator: top, bottom, or anywhere in between. The function is the same. That is, assuming the set point (temperature at which the fan switches on) can be adjusted. It is then simply a question of adjusting the set point according to where in the cooling circuit the sensing element is placed. I’ve done experiments to satisfy myself that this is indeed so. Also, plumbing or other efforts to try and get the sensing element to be inside the coolant space is a complete waste of time! The sensing element can simply sit on the outside of, for example, the top tank, so as to be in reasonably good thermal contact with the outside surface of the tank. Very simple and cheap, and easy to get at. |
All times are GMT +1. The time now is 00:18. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.