Headlight Flash
All,
So part of my MOT checks found that my headlight flash isn't working as is the main beam (shows how often I drive in the dark!!!) So my fault diagnostics have been fuses which are all fine and I then reverted to VIDA and I can activate the headlights through VIDA activations. As this is the case, it is my assumption that the lights work correctly and it must be the switch. Agree? I have therefore purchased a replacement indicator switch from a breaker and this did not fix the issue - they still don't work.. So, did I buy a duff switch and I need to buy again or should I be looking anywhere else to perhaps a relay, etc? Your thoughts and comments are always welcomed and appreciated. Kindest, Nigel. |
check with a multi meter if you have power at the switch if yes by pass the switch with a link wire if the light works switch is faulty
|
Now there's a conundrum.....
I would check the switches with the headlamp switch in ALL positions to see if there is any difference. Check the switch with a meter as described above... Can you read the switch settings/position in VIDA? (FYI the headlamp flash function is not I think a testable item though main beams are. Unfortunately booting up your laptop and turning them on/off with VIDA is unlikely to be considered a pass.....:-)) |
Quote:
|
All times are GMT +1. The time now is 07:26. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.