'A' pillar trim removal
I removed the bolt under the 'airbag' clip and pulled the trim away to disengage two metal clips and a plastic locating lug. However the trim still seems to be held at the bottom somehow. I thought it might be just a tight fit against the dashboard but even after using what seemed like an unreasonable amount of force it wouldn't budge.
Any suggestions? |
IIRC you also need to remove the dashboard side panel with the airbag switch on (the panel just pulls outwards from the side the seat), the cover should then wriggle free - it is a tight fit!
|
Quote:
Frank MY17 V90 ,I Don't remember removing the side panel that early but jrawarren may well be right. |
Thanks guys, I did remove the side panel as I'm installing the wiring for a dashcam. Maybe I just need to give it an extra strong tug.
|
Had to take the door sil trim off on my V60, has a funny little clip that was getting in the way. Gave more wiggle room, it is a PITA but you’ll get there.
|
Quote:
|
Quote:
Don't pull because in my case it smashed the windscreen!! |
All times are GMT +1. The time now is 12:04. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.