Guide:- Easy Load Cover Fix
Ok my load cover was rolling up when hitting bumps.
So a quick look at it revealed the plastic had worn/snapped so, lateral thinking came in to play- You need a hacksaw Couple of inches of 16mm pipe Araldite (Other types of glue are available) Paint Cut it down the middle so you get 2 half pipes Position them so they cover where the plastic is supposed to be and glue them on and spray it black Note - it might be easier to paint them first - then touch up if needed! Why bother? The load cover is not just to cover the boot, it acts as the space the sub is built for and deflects the rear speaker sound forward. Very good for your sound system:thumbs_up: https://lh3.googleusercontent.com/-c...2015.32.43.jpghttps://lh3.googleusercontent.com/-L...2015.32.27.jpg https://lh3.googleusercontent.com/-j...2015.32.06.jpg |
Painted and in place
https://lh3.googleusercontent.com/-z...2013.12.07.jpghttps://lh3.googleusercontent.com/-3...2013.11.42.jpg I KNOW, DOG HAIR....... Link to original thread here..... |
All times are GMT +1. The time now is 23:38. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.