Volvo Owners Club Forum

Volvo Owners Club Forum (https://www.volvoforums.org.uk/index.php)
-   S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General (https://www.volvoforums.org.uk/forumdisplay.php?f=19)
-   -   Cheap gas struts for dog guards (https://www.volvoforums.org.uk/showthread.php?t=282947)

VroomVroomClonk Jun 14th, 2018 08:19

Cheap gas struts for dog guards
 
One of my dog guard gas struts failed, which seems to be a common problem based on other posts on here. But, as I don't actually have a dog, I didn't really want to spend much money on replacing it and considered removing the guard instead. However, I found these gas struts at the very reasonable price of £1.79 each, so I have fitted an 80Nm version and it works fine.

Georgeandkira Jun 14th, 2018 12:08

longevity
 
The proof of the pudding will be service life.

Willow place Jun 14th, 2018 16:53

If the original strut has 2 ball joints how does the cheapie one fit ?

VroomVroomClonk Jun 15th, 2018 07:51

1 Attachment(s)
The new strut has the same type of ball and socket joints as the original so it just clips into place. See attached photo.

mrfixer Jun 15th, 2018 09:28

Well done for finding them at that price,who cares if they only last a couple of years buy a spare set just in case two minutes to change 👏

Willow place Jun 15th, 2018 16:14

Whoops ,checked the ad again and realised I was looking at the bottom fitting ! didn't notice the ball joint ! Will be ordering 2 tomorrow , Thanks for the info .

jgjones095 Jun 16th, 2018 07:42

Both my struts have never worked so I always keep the guard down, or use a cable tie to hold it up.

Lets see how these go!

jgjones095 Jun 18th, 2018 19:37

Arrived this morning and 5min later they are fitted and worked a treat :teeth_smile:

Thanks!

boggymarsh Jun 18th, 2018 21:10

I’ve had my dog guard for years, the same one for my V70 and now my XC70. It’s goes up and down like the proverbial whores knickers and works as well today as it did ten years ago but thank you for researching the issue and providing a solution for those who have problems with theirs staying up! :tounge_smile:

VroomVroomClonk Jun 19th, 2018 12:39

Quote:

Originally Posted by jgjones095 (Post 2415670)
Arrived this morning and 5min later they are fitted and worked a treat :teeth_smile:

Thanks!

Did you get the 80Nm or 60Nm version?
I guessed at 80Nm, but as I only changed one of mine I don't know what that would be like with both replaced.


All times are GMT +1. The time now is 11:31.

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.