Replacing heater hoses -any advice or tips
I’m about to replace the 3 hoses from the engine to the heater (through the bulkhead) on a 144 Any advice, or tips
Will air bubbles work their way out? Or do I need to prime in some way? Can’t find anything online regarding replacing the hoses Thanks Simon |
The air normally works its own way out
|
The hoses that go through the bulkhead on any 1-series Volvo are a pain to change due poor access. I cut the last ones off as they had sort of set onto the metal pipes: buy decent clips and lubricate the new hoses after cleaning up the spigots and they go on far easier (on an Amazon anyway). Those on my B30-engined Volvo 164 look as old as the car, so must do that sometime.....
P |
This place do some really good hoses for some classic Volvos
http://www.classicsiliconehoses.com/ 164 and Amazons |
All times are GMT +1. The time now is 02:18. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.