Originally Posted by Agro (Post 2672975)

Depends if you are due for an oil and filter change. If not then go to a chemist and buy a large 50ml or larger syringe, then a hardware and get a 400mm length of 4mm ID micro irrigation riser tube that will fit onto the syringe (you may also be able to get something similar from an auto parts store). Stick the tube down the dip stick hole and suck out as much oil as needed until you reach the middle of the min/max level. Check the level regularly and repeat as required.

Tip.. Remove the syringe from the tube rather than pull the whole thing in and out each time.