carpet patterns
Hi
has any one got a set of old carpets we can use as patterns that they would sell Thanks |
Probably best to mention the car type - unless of course you do want to replicate the carpet in my front room (!)
|
Hi
I would have thought that the floor pans were the same on all models but hear you go amazon estate LHD 1960 |
Quote:
You see I have a knackered set of rubber mats for a PV544 but I don't reckon that's gonna help is it? |
I do have templates as I use them to make my own carpet sets
Bare in mind early cars did not have the heater tunnel so the later models will need wider cuts to allow full coverage to top of sills each side ! Kind regards Robert.w |
carpets
The cut outs for the dip switch and accelerator will also need transferring to the left side.
|
Quote:
Best of luck Kind regards Robert.w |
Well, it's not a 1960 Estate as they were only announced at the 1962 Stockholm Auto Show, in the spring. I'd appreciate a reg number and details for my Estate database if you are willing. Photos too perhaps. PM me?
|
Pm sent
It’s the best advise I can give but if it helps I could cut a set leaving the foot dipper switch blank also the accelerator pedal “o” seat so you can lay in the car to trim yourselves so you know 100% that fits your car Some RHD examples of my work from standard black to deep pilled with edging which is more expensive as a trimmer will need to work their magic at extra cost https://www.phoenix-classic-restorat...o.uk/trim.html All the best Kind regards Robert.w |
This is the most important part to worry about when all left blank you can use the LH side lay in the car cut a X push down so it seats then trim off around the base for perfect fit
https://www.phoenix-classic-restorat...2p4q801wlhioza |
All times are GMT +1. The time now is 17:57. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.