For sale - Ported 90+
 

I was going to keep this for a future project but it's time to clear some stuff out.

Machined flat and ported out to accept T3 flanged turbos, drilled/tapped to accept M10 studs.

Came from an EGR car so has the port, I sourced the correct bolt to plug this.

Very good condition bar one hairline crack, I'm not convinced it actually goes all the way through the steel to be honest. Not cracked in the usual place though. It even has the stud for the brace intact.

https://i.imgur.com/OBOasre.jpg?1

https://i.imgur.com/cjMzYFp.jpg?1

£50 posted.

yes
 

I could use that. pm address and I'll pop down.

Still for sale.

time
 

I still want it , just not had the time to nip down. I'll come and grab it it the next few days .:thumbs_up:

No worries dude, should have given me a bell!

Still for sale.

apologies
 

Looks like I'll be going straight to 16v now with the manifold I already have for it. I was going to get it running on megasquirt but that would mean buying a new t3 turbo. I'm skint af now. :confused_smile:

PM sent

Back to the top.

Back up, offers?