d5 ecm-18b0 error
 

hi. almost 2 years ago i did replaced swirl flaps. now on i have nothing on a dashboard but sometimes car is bit sluggish. vida shows me swirl actuator offset fault but its look like its moving. when i did several times electronical swirl movement car back to normal had plenty of power and after 2 weeks happened again its bit sluggish no dash errors.just stored error in a computer with offset fault ecm-18b0. what i have spottted few Times i had a small jerk and car back to normal or get sluggish. is it something wrong with swirl flaps or could be swirl motor dying(looks like its moving)

You click on the code in Vida, then click View Information and it will give you an explanation of the code and the possible causes and solutions.