Road Signs in Driver Display/HUD
Occasionally when I start my car it fails to display any road sign information in the driver display or HUD. Switching off the engine and re-starting seems to cure the problem. Have any others experienced similar problems?
|
Not much help, but I have had this once, but seemed to correct itself as I was driving along.
|
I had this problem, it was suggested that I could use the Road Sign selection option in the centre display leftward swipe. Page 377 in my manual for my MY 20.
I have downloaded the PDF versions of the manuals and copied them to the iPads for on the move reference. |
Thanks for the suggestions. I've tried re-setting the road-sign information option in the central display. Option was selected (green) but still no road sign display.
Today, I noticed that if I started driving before the nav system had booted up the road signs were not displayed but if i waited until the nav system was ready the road sign symbols were displayed. I was updating some of the maps via a USB stick when the problems occurred. Perhaps the updating process slows down the nav system boot up. |
They also carried out a SW update which might also have fixed a problem as well.
|
All times are GMT +1. The time now is 23:01. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.