![]() |
P0299 code, low bust problem.
Hi everybody.
I have a 2010 XC60 2.4 D5 with 227000 km. A couple of days ago the car got into limp mode and the engine symbol showed up with a message visit workshop. I did a scan and the code was P0299. I did reset the code but it kept coming. I did an oil change, replaced all the filters, cleaned the pipes and the EGR, removed the intake and cleaned all the carbon and gunk...checked all the hoses and clamps and they are all tight, no leaks. The MAP sensor was absolutely clogged up and I cleaned it. Now it still gives me the code P0299. Those are the parameters: https://i.postimg.cc/mhx51yT4/IMG-6483.png What I'm missing here? Do you have any advice? Thanks. |
I think, looking at your title, that your car bra needs extra support - sorry I know that's no help, but I couldn't resist !
|
Hi, wondered whether you’d ever got to the bottom of this as I seem to be having the same issue. 3 garages, still no further on. Main dealer just states ‘new turbo’ needed, but from other threads turbos have been changed & problem still exists.
|
The vacuum regulator switching between the two turbos throws this code. Check the function and if it can move freely.
|
There are so many largely irrelevant replies that could be made to the original title ! Made me chuckle and beyond this I shall resist (with some difficulty) further comment :icon_smile_lachuh:.
|
Bloomin' predictive text ... J
|
The original post is now old, but have/did you check/ed the TCV, Turbo Control Valve ?
|
All times are GMT +1. The time now is 15:33. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.