P2 t4 turbo oil feed hose required.
 

Hi all, the hard pipe that goes from the block to the top of the turbo on my soon to be recommissioned T4 has a hairline fracture in, I did buy a replacement one from a very helpful guy on here some time ago, but can I find it, can I heck, so if anyone's breaking a b4204t5 engine and has one, or if anyone knows if the 2.0t part is the same or not, please do get in touch.

Many thanks in advance :)

got mine reasonably priced from FRF swansea £45 INC

thats with new copper o rings

bit of pig to fit the block end i made a little plastic u clip to hold the o ring on the banjo then pulled it out once thread a few turns

good luck

I did remove it and attempt a repair shortly before I took it off the road, quite fiddly, especially as I did it with the car on stands in the driveway, work didn't have a car lift then. I still can't believe I bought a used one and managed to lose it, I'd packed it in a big box with loads of bubble wrap to make sure it didn't get bent or anything, so to anyone other than me the box would appear to be empty, my guess is it ended up down the tip when my father in law cleared the shed out. That's a very reasonable price though, if it comes to it I'll price up a flexi braided one from the local agricultural place, as they have the machinery to make hoses to spec, although the garage did also do a further repair when they swapped the engine, and after I left it running for about half an hour the other day there was only one single drip after I moved so I can live with it for now.