Volvo Owners Club Forum

Volvo Owners Club Forum (https://www.volvoforums.org.uk/index.php)
-   400 Series General (https://www.volvoforums.org.uk/forumdisplay.php?f=13)
-   -   1.8 Head (https://www.volvoforums.org.uk/showthread.php?t=1717)

1995Volvo460 Jul 13th, 2003 13:22

1.8 Head
 
Hi,
as the username suggests i own a 1995 phase 2 460 - a SPi 1.8
I have heard a lot that the 400 series engines are similar or the same in some ways as older renault engines - is this the case?
If so, would it be possible to put a renault 19 16valve head onto the 460 1.8?
If not is there any other places i can start modifying the engine of the 460?
Thanks

Daniel M Jul 13th, 2003 23:32

RE: 1.8 Head
 
Hi..
As far as im aware, you wouldn`t be able to put a 16v head on your particular model, as its only a singlepoint injection. You may be able to do it on a 2.0i engine, the B20f as it`s a multipoint injection. It wouldn`t be as simple as that though, as you would have to change all the engine management system too. I did read somewhere a long while ago however on another forum, that a lad took a 1.7i engine from a phase 1 440, fitted it and put a R19 16v head on it, chipped it and put it in a Clio for racing! What a waste! So im sure if he can do all that, you could do something too.

You can visit www.volvotuning.co.uk - im not sure if they cater for the 440, but they may. Also www.kalmar-union.com , they may be able to help too. Im sure if none of these stock anything for the 440, you could always ask if they know somewhere. Also, try www.needforspeed.co.uk - based in Scotland-they have a car specific section and it will list everything they do for your particular model.

Hope thats been some help!

Dan.

1995Volvo460 Jul 13th, 2003 23:56

RE: 1.8 Head
 
Thanks for the help.

I think they did do a multipoint injection 1.8 but i think these were rare!! Maybe i should give it a full set of throttle bodies lol but i think that is a bit out of my league.

Just out of interest - what is the spec of you 'loud stereo'

Thanks

Daniel M Jul 14th, 2003 19:19

RE: 1.8 Head
 
Hi...
Erm, right. I have a Kenwood CD headunit, Pioneer 150 watt 13 cm components front and rear (with integrated tweeters), 2xJBL GTO 6000 400watt 4 channel amps (clear top panels), and 2x12 Rockford Fosgate Punch 400 watt Subs. Not a massive spec, but very loud! All Autoleads wiring too, and the mandatory boy racer blue neons...

Does that help?? Are you running anything in yours??

Dan

P.s. Now off to answer your new question...:-)

Dan F Jul 15th, 2003 14:27

RE: 1.8 Head
 
Hi.

There are no multi point 1.8i 400s.

Engines used:
1.7 8v carb
1.7 8v MPEFi
1.7 8v MPEFi Turbo
1.6 8v MPEFi
1.8 8v SPEFi
2.0 8v MPEFi
1.9 8v TDi

All engines are Renault derived, and use some renault parts, but the heads were reworked by Porsche for Volvo I believe.

Hope that is of some use.

Cheers,
Dan.

1995Volvo460 Jul 15th, 2003 17:27

RE: 1.8 Head
 
At the moment i am running a sony MP3 head unit, 2 sets of infinity components (13cm and 17cm), Phoenix Gold QX300.4 amp, kenwood 10" sub, Phoenix Gold QX180.2 amp. Autoleads wiring but no neons yet lol. I have another 2 sets of infinity speakers waiting to go in a the boot - the same as the others but two-ways instead of components.

Also thanks to Dan F for the extra engine info.

davebslater(uk) Jul 20th, 2003 18:11

RE: 1.8 Head
 
having just done a cylinder head swap (bigger valves , ported , polished) and reground cam i could offer some advice if you need it

you can email me at davebslater@hotmail.com


All times are GMT +1. The time now is 15:45.

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.