Volvo Owners Club Forum

Volvo Owners Club Forum (https://www.volvoforums.org.uk/index.php)
-   850 / S70 & V70 '96-'99 / C70 '97-'05 General (https://www.volvoforums.org.uk/forumdisplay.php?f=16)
-   -   aw55-50 v aw50-42 (https://www.volvoforums.org.uk/showthread.php?t=273776)

H10DMD Oct 13th, 2017 11:53

aw55-50 v aw50-42
 
hi all
my gearbox broken.
my car is a 1999 V70 2.5T petrol with a AW50-42 gearbox.

so two questions:
1, can i put any AW50-42 box back in? are the bell houses the same on a 2.0, 2.5 diesel, 2.3 T5 and gear ratios?

2. can i replace with a AW55-50 box? i know will need things like the gear shifter and gearbox ecu. but is it a replaceable option without major surgery.

any help much appreciated

David

winsox Oct 15th, 2017 09:28

Hello there glad to know I'm not on my own with the 5 Speed auto.

You can't change it to a 4 Speed auto. You cannot just change to manual as it's ME7 system.

Why not fix the auto ?

I'm in middle of fixing mine...suffering from flares and smashing into gear or not going into gear at all.

c_lee Oct 15th, 2017 14:42

On the 1999 V70 with the AW50-42 the bell housing used on the diesel is different to the petrol engined one.

Both bell housings have the same 'gearbox proper' mounting bolt layout.

I believe there can be different final drive ratios too.

Early AW50-42 gearboxes have some different types of sensors though case threads and drillings are the same.

With determination and research these problems can usually be overcome - the replacement gearbox I fitted in my V70 diesel came from a C70 petrol.

I did a thread on here 2 - 3 years ago but only actually changed the gearbox after initially trying to repair the original box - so the swapout is later in the thread.

Colin

DunkinBiskits Oct 15th, 2017 16:53

Quote:

Originally Posted by winsox (Post 2327596)
You cannot just change to manual as it's ME7 system.

can be done but its not as easy as a pre ME7 swap

H10DMD Oct 20th, 2017 11:17

Thanks all.

If i knew where to buy bits for box might give it a go.
Basicall a drive shaft fell out of box and i believe the end of the driveshaft has burred over the splines in the diff unit.
i know its not the driveshaft as i filesd the end down to test it.

so what i need is one part of a diff.

not interested in putting a manual in just everything else on car good.
Local gearbox garage wants £2700 for a recon box. ooouuuch

well thanks for your replies
David

winsox Oct 20th, 2017 11:31

Find a scrap box and get diff out. Bit of a task.


All times are GMT +1. The time now is 16:46.

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.