Do You Need A Flash Code Reader Ph2 850
 

I have been approached by several people with regard to the manufacture of the flash code readers used on the later 850 4.3 Motronic vehicles.....It will also work on the 20v and 10v engines prior to the 1997 4.4 motronic. The 4.4 motronic 2.5 20v and LPT models do not produce flash codes.... It will work on the Fenix 10v including the '70 series..
The readers i will make will be fairly basic affairs,. with a box mounted button and 12v led...There will be three wires from the unit box, one -(5) one +(16) and one for the relevant ecu, fuel (3), ecc (6) and cruise (13)....
Full instructions to use will be included, including how to read the codes and how to delete the codes...
The cost will be £20, including the unit, instructions, P&P Payment by Paypal to jod.jod@talk21.com so if anyone is interested add to the list below....£5 of the cost will be given to Charity....

Forum members with the code reader include;

amgarrett
John_C
stusT5
George
coldfield
irf
tarmacsurfer
RiPsTa33
nikgallagher
Spellsinger
Teledale
Bruce T
DEVON DAVE
cam
polred28/t5
daryl
scr8pdo
theprancingmoose
valfrid
Pal2
mickythemechy
Musicmaker
JustCruzin
adrianmac
cryz2
trojan
br850


cheers
jod

oh yes please mate i'll nab one off ya

Hi Jodt5, If one of these will work with my early v70 I'll have one. Its a 1998 v70 t5 with manual throttle and the connector under the central arm rest. other than that I'm not sure how else I can check which system I have.

Regretably the flash code reader will not work with the 4.4 motronic ecu, which is fully OBD11 complient....you will need this type of stuff... http://www.ilexa.co.uk/acatalog/volfcr.html
cheers
jod

Go on then - add me to the list. Saves me a job of making one up!!!

Stick me down too. You could bring it up to Marham if you want.


George

Hi Jod,

I'd like one, I assume this is the same system as on my 1994 2.5 10v?

Cheers
Neil

Hi Neil, you will be able to read your own codes via the built in diagnostic unit....see here...http://volvospeed.com/Repair/a2.html
cheers
jod

Cheers Jod,

Thats what i was looking for!! :)

Dont suppose you know that the warning light is, bottom right, like an upside down Y ?

Right the cost is confirmed at £15.00, including manufacture, instructions, Postage and Packaging....
Georgie Dee has been sent the prototype, no doubt he will let us know how he gets on....
cheers
jod