1993 240 Cylinder Head
 

Hi Does anybody have a good cylinder head for a K Injection 240.Must be ready to put straight onto car.Regards Ron.

This is a 2.0 litre engine in a Torslanda. Mid Kent. Pistons appear OK but the damaged head has bent valves and a crack. A good ready to fit head, not in need of skimming, would be ideal as the car is in the garage it was recovered to. It may in the meantime be recovered back home though. Any one?

Possible you can help Paul T?

Hint taken Derek! I just might have: I know I have a spare engine in my parts place, but won't be there until the weekend at the earliest - its 50 miles away.

So one for you Derek: how can I tell if the head is for a 2.0 or a 2.3? Ditto on the engine too, if I have to resort to stripping it.

P

Triple-s - This isn’t the engine or cylinder head Derek is looking for, but if you look at picture 4/5 then you can see ‘B200’ in raised lettering on the crankcase.

Look in the same place to identify the capacity of any other engine...

https://rover.ebay.com/rover/0/0/0?m...2F392094321477

Cheers

Are you sure? Last K jet was 1990

240 1992 Cylinder Head
 

Hi Ron when you to your garage this week end if you have an exhaust manifold to that would be great,If you need to contact me 07907445568.Regards Ron.