Original B20B SU carburettor set
 

This is a set of SU parts from a 1968 B20B 145S. I think there's very little missing plus some few spares because my engine was tuned and I recalibrated them, so original calibration + extras, with one spring required. The bodies are good as in my experience the pistons dont wear badly because they are clearance fit to the bell housings. An SU refresh kit of gaskets and jets would be advised. There's several jets but the link-tube stiffens with age. The jet tends to wear more than the needle because the needle is spring-loaded against one point of the jet. It looks like one new spring is required: adding sections of extra cut spring is an SU calibration technique that I used.
£23 inc. shipping.

Hi
can I have these please
I will PM you my number


Thanks

Hi , Have you sold the carbs now if not send reply please

Hi Annika. Sorry to disappoint, I am deliquent in marking these as sold. Mike