Camshaft Position Sensor Issue
 

I am having a Camshaft Position Sensor Issue.

The vehicle developed a misfire when in the outside lane of the M25! And I had to get Volvo SARA to recover the vehicle back home.

Initially the problem was a split hose from the intercooler to the throttle body!

Attachment 121794

But I then had a fault code for the MAF so I replaced it with a genuine Bosch one.

Then it came up with a code for the Camshaft Position Sensor (ECM-P033500 Camshaft Position Sensor A Circuit) after an hour of swearing and scratching up my hands and arms I replaced the Camshaft Position Sensor with a genuine Bosch one.

But I still have the fault code for the Camshaft Position Sensor and although the car will now start again, it is very reluctant to start first of all, and I am back at square one in not knowing what the issue is!

Anyone have any ideas?

First job is to stop replacing parts just because there is a fault code.
The code you have can be caused by a range of potential problems as listed in Vida so you work through and eliminate the possibilities.

If you have a wiring issue for example (just one of the possibilities), no amount of new sensors will fix the problem.