Braking and cutting out
While running on LPG and braking to a stop, the revs on my V70 Bi Fuel die and engine cuts out. It only happens while slowly coming to a halt. I can only think that it's the extra power requirement needed by the ABS. Does anyone else put up with this?
|
It is the servo changing the manifold vacuum that bringing the cutting out on.
The cause is poor fuel mixture control, it might be time to give the stepper motor a flush out again. Increasing the gas pressure a little could also help but you might end causing other problems doing that. |
Do you sometimes get a hissing sound from under the dashboard when applying the brakes? That it classic signs of servo fault on P2 V70s.
|
Classicswede
Thanks. I will give it a flush out. Last time I did it was 10k miles ago but never had cutting out before while braking to a halt. Simon Thanks. No hissing and braking efficiently. Just annoying stalling sometimes coming to a halt. |
All cleaner soaking in now and ready for me to start up tomorrow.
|
All times are GMT +1. The time now is 07:46. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.