1800 parts
Gents
Generating money for my 1800 pot and clearing out those items I’m unlikely to use. Bonnet - no damage, no cracking, not in primer so you can see the metalwork. Seams are good. These are unavailable and I don’t think skins are either Brakes - calipers, drums (including the 1969 version), back plates, spindles Interior trim - door panels (including the top finishers), rear seat back, quarter panel trims. Various in red and beige. Not great but can be used as templates Stainless trim - door top, side trims Windscreen trim, couple new others reusable, front windscreen seal, was on for about a week but the guy who painted the car in 2007 mucked up the windscreen trim and I had to get the screen redone and he paid for it. Fuel tank - second hand but not rusty. It’s been fogged inside with an inhibitor, sealed and been sat in the loft Rear heated screen, need to do a continuity test. Again it’s been sat in the loft doing nothing. 1970 Black ally grill, few dinks but should be recoverable Several items of chrome such as rear licence plate light, air intake grill and a number of switches and estcheon plates PM if you need anything Russ |
parts
Quote:
I am keen on the bonnet, 2 x front and 2 x rear calipers for the dual pipe system, brake backing plates x 4. Please let me know your best prices on these items. Ta Kassie 078 2887 9494 |
Bonnet would be of interest depending on price. Not ready to start doing my 1800 yet but worth collecting parts it will need.
|
Quote:
Kassie has asked first dibs, be sure to let you know if the sale doesnt go through |
Quote:
I also have the key but it currently is in that safe place i put it in case it got lost. Just need to remember where the safe place was! Russ |
I'd like the screen rubber and trim pieces Russ. I'll message you.
|
Hi russ ,
How much would you like for the fuel tank ? Also is it for a P1800s ? Would you let after full payment a courier to collect from you ? Cheers russ speak soon Kind regards Robert.w |
Quote:
It is for a 1800S, I will get some pics off to you so you can confirm it is suitable. As to price I would prefer you to provide a price you are comfortable with. Message me I can get it bubble wrapped up for shipping Russ |
Gents thanks for all your messages, both PMs and threads regarding these parts.
Lots going on at work at the moment so I won’t get to take pictures showing condition of the parts before the weekend. Hopefully not an issue Russ |
No worries Russ.
Just make sure the kettle is on when I call for the brake drum(s) |
All times are GMT +1. The time now is 08:02. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.