V60 Rear Discs
 

As i found the rear discs on the Polestar V60 a bit small in the 20" rims I looked at options for getting them larger. Looked at the Rotora ones bit didnt want to mess with the calipers. After speaking to a company in the Uk I had some 350mm two piece discs made to match the front ones.
https://i.ibb.co/d6G6BQx/IMG-20200703-150409-8.jpg
https://i.ibb.co/M5WyhrS/IMG-20200703-150403-2.jpg
I had them made with 8mm less offset than the standard ones to allow for a caliper mounting bracket. I machined a bracket up ready for the swap.

https://i.ibb.co/6WJZWKF/received-2694091110825935.jpg

So yesterday I finnaly got round to fitting them. Really happy with how they look and they do work really well. Im going to make some new brackets as there was a couple of bits I can improve on. But overall I,m pleased with the job. Had to make a tiny mod to the mounting point on the car but nothing drastic.
https://i.ibb.co/hKGMWvK/IMG-20200713-153841-4-1.jpg
https://i.ibb.co/ZfchvvZ/IMG-20200713-165400-4-1.jpg
https://i.ibb.co/RC8vw4x/IMG-20200713-141753-6-1.jpg
https://i.ibb.co/gvDFN7h/IMG-20200713-151956-0-1.jpg

Very nice.

Bet they weren't cheap...

Not to bad. Lot cheaper than the fronts. 😁😁

bin the nylock nuts use ordinary nuts with locktite :regular_smile:

Bracket is Threaded as well so just belt and braces. Will be coming off again soon as Ive redesigned the brackets