Top mount securing nut broken and anti skid warning !
 

Hi chaps, I've got a 2008 V50 2.0d R Design and I have 2 issues. I have swapped out my eibach springs for the standard ones and have had a nightmare with the NSF top mount. Twice this has happened, whilst tightening the top mount nuts by the strut brace the bloody securing nuts built into the top mount keep shearing off!!! So now I can't remove the broken nut which means technically I only have 2 "tight" bolts in the top mount, is this safe enough to drive?

Also yesterday I replaced the OSF abs sensor and now I have the anti skid error message and no ABS! Any ideas?

Thanks, Ben

I had the same. A garage with very long nosed pliers can get a grip on the nut on the underside of the strut top mount to either tighten the bolt or remove for replacement.