Volvo Owners Club Forum

Volvo Owners Club Forum (https://www.volvoforums.org.uk/index.php)
-   C30 / S40 & V50 '04-'12 / C70 '06-'13 General (https://www.volvoforums.org.uk/forumdisplay.php?f=58)
-   -   Oil spray?? (https://www.volvoforums.org.uk/showthread.php?t=293368)

F10pst3r Mar 30th, 2019 13:31

Oil spray??
 
1 Attachment(s)
Noticed oil spray on the top of the bonnet. Opened it to find the below pictures. Anyone know what could be causing it? (S40 1.6D)

richard Mar 30th, 2019 13:44

Leaking intercooler hose

Edit: theres a common pipe that fails on the 1.6

F10pst3r Mar 30th, 2019 14:04

Quote:

Originally Posted by richard (Post 2508947)
Leaking intercooler hose

Edit: theres a common pipe that fails on the 1.6

Any idea which hose it is?:)
It seems to be leaking around the engine intake area. Just above the AUX belt

emy Mar 31st, 2019 11:59

3 Attachment(s)
I had it cracked due to the age of it, if is the same in your case. Usually I check the engine every two/three days, so no much dirt of oil, I noticed the cause and located it easily. I tried to tape it, using pipe tape, also put some kind of glue and wrapped it, did not last, the pressure was too high and failed again. I bought one from Amazon for £16. I removed the top plastic part and replaced it in one piece. It was not easy job, removal of bumper is a must. Its been six months since, no problems with the replaced one.
https://www.amazon.co.uk/gp/product/...?ie=UTF8&psc=1

I would get the sorter version of the hose, removing the top plastic part is very, very difficult. I end up removing in pieces.

ksmi Mar 31st, 2019 14:13

Quote:

Originally Posted by F10pst3r (Post 2508945)
Noticed oil spray on the top of the bonnet. Opened it to find the below pictures. Anyone know what could be causing it? (S40 1.6D)

Are 'THEY' Fracking in Basingstoke?

K.

F10pst3r Mar 31st, 2019 15:49

Quote:

Originally Posted by emy (Post 2509128)
I had it cracked due to the age of it, if is the same in your case. Usually I check the engine every two/three days, so no much dirt of oil, I noticed the cause and located it easily. I tried to tape it, using pipe tape, also put some kind of glue and wrapped it, did not last, the pressure was too high and failed again. I bought one from Amazon for £16. I removed the top plastic part and replaced it in one piece. It was not easy job, removal of bumper is a must. Its been six months since, no problems with the replaced one.
https://www.amazon.co.uk/gp/product/...?ie=UTF8&psc=1

I would get the sorter version of the hose, removing the top plastic part is very, very difficult. I end up removing in pieces.

Thanks for this!!
Is this hose the drivers side intake hose? (Cold side of the inter cooler) going up to the MAP sensor?

That’s the one I have a hole in, found it yesterday and used some heavy duty self bonding tape for the mean time. If this part is the right one I’ll go ahead and order it!

F10pst3r Mar 31st, 2019 15:49

Quote:

Originally Posted by ksmi (Post 2509154)
Are 'THEY' Fracking in Basingstoke?

K.

Might as well be with the state of my bonnet 😜


All times are GMT +1. The time now is 00:12.

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.