Stainles Steel de cat back system
 

Selling a custom stainless steel cat back system which was fitted by Bristol Exhausts to my old S40 1996 1.8. It has a nice oval tip slightly larger than standard fits nicely in the bumper cut out. This system cost me £300 back in 2010. Make me sensible offers.

Stainless steel decat pipe.

Collection from Devizes Wiltshire many thanks.

I also have the original Cat which has passed the MOT every year. 1996 1.8 engine.

im interested can you post some photos please.....

and price would be good

Its well tarnished obviously no rust. I gave the tip a little polish, I know there's some products out there which can get it all shines up!
The de cat pipe is still attached to the mid section, if not required I can separate them
http://i1366.photobucket.com/albums/...s7fcfe18e.jpeg
http://i1366.photobucket.com/albums/...sa29e3c79.jpeg
http://i1366.photobucket.com/albums/...sfeea39c5.jpeg

This is the original Volvo cat. passed the last MOT with no emission problems
http://i1366.photobucket.com/albums/...s21dbf852.jpeg

Price?

Would this fit a 2003 1.8?

Gary

Yes and No, the cat looks like my original cat that came of my V40. The early cars that weren't the T4's had rod gear change linkages. Yours being a later car should have cable so you wont get any clearance issues there.
The mounting points are all the same maybe the rear silencer mount points might need tweeking. But apart from that it should go straight in apart from the pipe to cat as your car's cat is in a slightly different position and the pipe sizes might be a bit different.

Cheers DB.

Looks like I'll give it a miss and buy a new system, custom fitted to my car.

After all this other work has been completed and the wee Ka is back on the road.

Gary

£125 offered........will need to get a courier to collect though

PM me with details and we can discuss, are you after the de cat as well?

ive not got enough posts for P.M system

if you send me your email adress by P.m i can reply on my own email

cheers luke