164e
 

Hi i`m after injectors brain pressure valve relays and associated parts as spares.
PM me iff you can help .Would need posting to Kings Langley in Hertfordshire.
Sensable price paid.
PM me
Regards
Mike B

Unless you are after originality if i had a 164E i would convert the injection to either K jetronic from the V6 ( use some parts like injector holders from a 1974 140 ) or update the injectors pump and sensors and use a programmable ecu like the emerald M3D or Megasquirt .. It would transform economy and drivability if not power which was always adequate !
The original system was prone to going out of tune with injectors semi blocking resulting in weak mixture which could be compensated for by adjustments to the pressure sensor up to a point . The fast idle bypass would stick too . Over time i'm sure the components in the ECU would go out of tolerance causing odd problems . No microchips or memory in those days !

need to DM but short of quite a few messages before being eligible to do that.
Apologies for the SPAM - trying to reach the limit of the required 30 msgs. Pls blame not only me. It is a matter of safety -> a bit urgent.

Congrats looks like you are finally there